Phantom 4 RTK Phantom 4 RTK Firmware update (v02.02.0401)

[wdejager]

DJI heeft een firmware-update beschikbaar gesteld voor de Phantom 4 RTK. Er zijn flink wat verbeteringen doorgevoerd, zodat je in onderstaande lijst kunt zien. Let wel: je kunt na het upgraden niet meer downgraden naar een vorige versie.

Phantom 4 RTK Firmware – v02.02.0401

Overview:

• Date: 2020.03.10
• Aircraft Firmware: v02.02.0401
• Remote Controller Firmware: Phantom 4 RTK Remote Controller: v02.02.0403
• Phantom 4 RTK (SDK) Remote Controller: v02.02.0401
• D-RTK 2 Mobile Station Firmware: v02.02.0403
• DJI GS RTK App: v2.1.6
• DJI Assistant 2 For Phantom: v2.0.8
• DJI Assistant 2 For MG: v2.0.13

What’s New?

• When planning Photogrammetry, Linear Flight, Terrain Awareness, and Block Segmentation operations:
• Added a Metering Mode option in Camera Settings. The default is average metering as it best serves mapping applications.
• Added Relative Altitude in operation parameters to set the relative height between the takeoff point and the operation area. NOTE: Make sure to set the correct relative height to ensure the results contain appropriate overlap ratios.
• Max flying speed is now displayed with an accuracy up to one decimal place.
• When planning Terrain Awareness operations, mission areas can be created by importing KML/KMZ files.
• Exported mission files now includes elevation optimization data.
• Log-ins to the DJI GS RTK app are valid for 60 days instead of 7 days.
• Changed the output file format of the D-RTK 2 mobile station to CSV when using the mobile station as an RTK rover.
• Fixed the rare issue where the camera skipped some shots.
• Fixed rare control stick calibration failures.
• Fixed the issue where firmware v02.02.03xx failed to download in the DJI GS RTK app.
• Optimized the UI for Cloud PPK Service and added more countries/regions where PPK data can be used. The Service is available everywhere except Hong Kong SAR, Macao SAR, USA, and Canada.
• Only Mapbox is supported now for map display in the DJI GS RTK app. (Mainland China version excluded)

Notes:

• The aircraft cannot be downgraded to v02.02.0011 or a lower version after this firmware update.
• After updating the Phantom 4 RTK Remote Controller with this firmware version, the remote controller can only be used with the Phantom 4 RTK aircraft.
• The firmware for the D-RTK 2 Mobile Station can only be updated using the DJI GS RTK app.
• Make sure that the firmware for the aircraft, remote controller and D-RTK 2 Mobile Station is all up-to-date. Otherwise, they will not work together.
• Using this firmware with a version of DJI Terra older than v1.2.0. is not recommended, as some functions will not work properly.